8
To prevent INJURY from pinching, keep hands and
fingers away from the joints while assembling the rail.
WARNING
CAUTION
WARNING
WARNING
ASSEMBLY STEP 1
Assemble the Rail
To avoid installation difficulties, do not run the
garage door opener until instructed to do so.
1. Turn the opened rail carton upside down and
empty its contents onto a level work surface.
2. Unfold the rails, taking care to avoid kinking the
screw rod joint.
Center
Rail
Trolley Rack
Extend
End Rails
O
u
t
w
ard
Extend
End Rails
O
u
t
w
ard
Rail Assem
b
ly
Carton
Remo
v
e
Card
b
oard Packing
Remo
v
e
Card
b
oard
Packing
Rail
S
u
pport
Braces
Straight
Door Arm
Rail Assem
b
ly
Hard
w
are Bag
Chassis Assem
b
ly
Hard
w
are Bag
Center Rail
Door End Rail
Rail
Sprocket
Trolley Rack
Sprocket End Rail
Rotate
Extension Rail
NOTE:
During assembly, avoid pulling the rail section
housing the trolley rack away from the screw rod.
The rack is factory set about 9" (23 cm) from the end
of the screw rod to the center of the rack.
If the plastic liner slides part way out during
assembly, simply push it back in.
3. Rotate the rail sections so that the flat side is down
and the screw side is up. Keep it clean and free of
debris while you are working.
