Chamberlain LiftMaster Professional HS670 Скачать руководство пользователя страница 20

Страница: 20 / 36

SEQUENCED ACCESS MANAGEMENT SYSTEM (SAMS)

SAMS DEFINITION

The Sequenced Access Management System or SAMS allows the customer more control when managing vehicular entrances to areas
such as industrial complexes, businesses and airports. The basic concept of the system is that traffic is controlled by two gates
installed in tandem, a fast moving gate such as a barrier gate operator and a slower moving more secure or ornamental gate such as a
single or pair of slide/swing gate operator. The design of this gate system balances the demands of speed during high traffic periods
with security during low traffic periods. Barrier gates typically have the fastest open times of the many gate operator types and the slide
or swing gates allow you to effectively seal off the perimeter of the complex you are planning to secure.

NOTE:

Connect all entry devices to the slide or swing gate. If using a device, such as a 7-day timer, to latch the slide or swing gate

open during high traffic times, connect the device’s N/O relay output to the GL board’s Interrupt Loop input. Once the device activates
the Interrupt Loop input, the next vehicle to access the SAM system will lock the gate in the open position until the device deactivates.
When the device deactivates, the timer to close will automatically close the gate.

SAMS OPERATION

1. When an authorized vehicle accesses the gate system, the

SAM system responds by first opening the gate farthest from
the vehicle, the swing or slide gate.

2. Once the swing or slide gate is open, the barrier gate begins

its open cycle.

3. Once the barrier is open the vehicle may pass through the SAM

system. At this point you have two options in how you would
like to initiate the SAM systems closure. You may chose to:
a) Use a timer to close system to automatically close the

barrier gate after a preset amount of time or

b) Use a loop system to close the barrier gate after the vehicle

has passed through the SAM system.

4. Once the barrier gate is closed the slide or swing gate will

activate its internal timer to close and begin closing.

5. If another authorized vehicle accesses the SAM system before

the slide or swing begins to close the barrier will open and
allow the vehicle to pass through the SAM system.

6. If another authorized vehicle accesses the SAM system during

the slide or swing gates closing cycle the SAM system will
reopen the slide or swing gate. Once the slide or swing gate
reaches the open position the barrier will then open to allow
the vehicle to pass through the SAM system.

7. If no other authorized vehicles access the SAM system the

swing or slide gate will close followed by the barrier.

SAMS WIRING

1. Install conduit between the BG770 and the HS670 for SAMS

control wiring.

2. Run a 4-conductor cable in the conduit between the BG770

HS670.

3. Locate the SAMS relay terminals (J5) on the GL board in the

HS670 and locate the auxiliary limit switch in the BG770.

4. Attach a wire from the SAMS relay terminal (J5) on the GL

board to terminal 1 on the BG770 terminal strip.

5. Attach a wire from the SAMS relay terminal (J5) on the GL