Chamberlain GPS1000 Скачать руководство пользователя страница 2

2

IMPORTANT SAFETY INFORMATION

To reduce the risk of SERIOUS INJURY or DEATH:
•  READ AND FOLLOW ALL INSTALLATION 

WARNINGS AND INSTRUCTIONS.

•  FOR INDOOR USE ONLY. 
•  To avoid SERIOUS PERSONAL INJURY or 

DEATH from electrocution, disconnect ALL 
electric power BEFORE performing ANY service 
or maintenance. 

•  DO NOT OVERLOAD RECEPTACLE. Maximum 

current is 10 amps.

•  DO NOT immerse cords, plugs or product in 

water or other liquid. 

•  DO NOT operate appliance with a damaged 

cord or plug or after the appliance malfunctions 
or has been damaged in any way. Return 
appliance to nearest authorized service facility 
for examination, repair or adjustment. 

•  The use of accessory attachments NOT 

recommended by the appliance manufacturer 
may result in fire, electric shock or INJURY to 
persons. 

•  DO NOT let inflator head touch hot surfaces.
•  DO NOT use appliance for other than intended 

use. 

•  Connect to a properly grounded outlet.  
•  DO NOT use a 3 – 2 prong adapter. 
•  DO NOT use above hazardous locations or 

areas where water can accumulate or in rain or 
mist.

•  NEVER USE the inflator as a toy. 
•  NEVER permit children to operate or play with 

the Garage Power Station. KEEP OUT OF 
REACH OF CHILDREN.

•  Keep inflator away from flammable areas/

liquids at ALL times. 

•  DO NOT handle work light or try to plug 

something into receptacle when your hands are 
wet or when standing on a wet or damp 
surface. 

•  This appliance MUST ALWAYS BE USED in 

accordance with all local electrical and building 
codes. 

•  The Garage Power Station MUST be RIGIDLY 

fastened to structural support on ceiling.

•  Arcing parts. Keep the compressor/motor/work 

light at least 20 feet away from explosive 
vapors.

To avoid personal INJURY or DAMAGE to 
property and to reduce the risk of electric shock 
and fire:
•  DO NOT use this cord reel in explosive 

atmospheres, near flammable liquids or where 
explosion proof equipment is required. 

•  DO NOT direct air stream at body. 
•  Use ONLY recommended air-handling parts 

acceptable for air pressure. 

•  DO NOT over-inflate. 
•  This inflator is designed to inflate car tires, ATV 

tires, motorcycle tires, bicycle tires, sports 
equipment, air mattresses, beach toys and 
other inflatables. 

•  Allow inflator to cool down 10 minutes after 

each 10 minutes of continuous use. 

•  Use safety glasses. Use facemask or dust mask 

if operation is dusty. 

•  DO NOT allow cord reel to retract the cord by 

itself as DAMAGE or INJURY may occur from 
excessive rewind speed. 

•  BEFORE cleaning product, unplug from the 

power source. 

•  DO NOT use solvents such as gasoline, 

turpentine, etc. to clean unit. Keep cord reel 
clean to assure smoothest operation. To clean, 
simply pull cord to its full length and allow to 
retract through a dampened rag. DRY 
thoroughly BEFORE plugging back into outlet. 

•  PULL out cord to full length when using the 

receptacle. 

•  Disconnect ALL electrical power BEFORE 

replacing bulbs.

•  Use ONLY 50 watt or smaller bulb.
•  For Light Duty Use ONLY.

Содержание GPS1000

















Отзывы: