3
PROGRAM PIN
To program the Keyless Entry to more than one garage door opener,
repeat the programming steps using a new PIN for each additional
garage door opener.
Press and hold the
*
and
#
buttons until the
lights on the keypad stop blinking.
Click
Click
Click
Click
GARAGE DOOR OPENER TYPE
# OF
PRESSES
Yellow Learn Button (315 and 390 MHz S 2.0
®
)
1
Purple Learn Button (315 MHz S
®
)
2
Red/Orange Learn Button (390 MHz S
®
)
3
Green Learn Button (390 MHz Billion Code)
4
Enter a 4-digit personal identification
number (
PIN
) of your choice, then press
the
ENTER
button.
Press and release the
ENTER
button on the
Keyless Entry the number of times that
corresponds with your garage door opener
type:
Press and release the
0
button.
Click
Click
Press and release the Learn button on the
garage door opener. The Learn LED will
light.
Within 30 seconds . . .
Click
Click
Enter your 4-digit
PIN
, then
press and release the
ENTER
button until the
garage door opener lights
flash or two clicks are
heard.
Click
Click
To test, enter your
PIN
,
then press the
ENTER
button. The garage door
opener will activate.
1
Click
Click
Programming
2
Click
Click
3
4
5
6
7
