Copyright © 2015 Alarm.com
|
www.alarm.com
|
v4.0
LiftMaster MyQ
®
|
Installation Guide
3 - Setup Wi-Fi on the MyQ
®
Garage Wi-Fi Hub
Method 1: Using Internet Connected Device
1)
Make note of the home Wi-Fi’s network name and its associated security
key/password.
2)
Plug in the Wi-Fi Hub. The Blue LED will blink.
3)
Make sure Wi-Fi is enabled on your laptop, tablet, or mobile device.
4)
Locate the list of available Wi-Fi networks and select “MyQ-nnn” network.
“nnn” is the last 3 digits of the Wi-Fi Hub’s serial number.
5)
Launch the mobile device’s web browser and type “setup.myqhome.com”
into the web browser’s address bar. If unable to load try using a different
browser.
6)
Follow the steps in the MyQ® Wi-Fi Setup page to complete the setup.
You will be required to enter the Wi-Fi name and password for the home
network.
7)
When prompted, do not install the MyQ® Garage app. When the LED light
is solid green, Wi-Fi connection has been established and you may close
the internet browser.
Method 2: Using WPS
1)
Put the Hub into WPS mode: With Hub powered and Blue LED blinking,
press/release the Hub’s BUTTON. The Hub’s Blue LED will turn on solid.
2)
Within one minute, press/release the WPS button on the router.
3)
Within a few minutes, the Hub will connect to the network and the Green
LED will turn on solid indicating successful connection.
Method 3: Using Bluetooth (iPhone users only)
1)
Plug in the Wi-Fi Hub. The Blue LED will blink.
2)
Connect your Apple® mobile device to the Wi-Fi network.
3)
On your Apple® mobile device, go to Settings > Bluetooth, and turn on
Bluetooth.
4)
Find the Bluetooth MyQ-nnn device and select MyQ-nnn device to pair.
“nnn” is the last 3 digits of the Wi-Fi Hub’s serial number.
Note: If your phone believes the Hub is not connected to the internet, try
forgetting the device before pairing. To do this, select the blue
information icon to the right of the device name and select forget this
device. The MyQ-nnn device will reappear for pairing in few seconds.
5)
When prompted, allow phone to share Wi-Fi network settings with the
Wi-Fi Hub (this may take a minute). When the LED light turns green the
device has successfully connected to the Wi-Fi network.
6)
DO NOT choose to install the LiftMaster iPhone application.
LED Indicators:
Back of Wi-Fi Hub:
Serial #
