6
Lights Permanently Off:
Turn the control switch OFF.
Light Permanently ON (Manual Override):
By flipping the connected power switch Off-On twice quickly, it will change from Auto Mode to
PERMANENTLY ON Mode. The detector will return to “Auto Mode” i.e. light will go off automati-
cally after two hours or by flipping power switch Off-On once instead.
IMPORTANT: If you findthe light permanently On accidentally (notby the above method),
please switch power Off for 3 second or so and then switch power On again, it shall return
to Auto Mode and work normally.
Trouble Shooting:
1. Unit doesn’t function at all / Lights don’t come on
- Check wiring to unit to make sure that you have correct AC power at the unit.
- Check the wiring from the unit to the source of power to make sure you have wired the unit
correctly.
- Check the ambient light control if it was set at your desired level
2. Detector clicks but does not operate
- Check lamps are not broken.
- Check lamps tight in lampholders.
3. Lights go on and off quickly
- Ensure light and heat are not being reflected back onto the detector. Check for white or
reflective surfaces in protection pattern.
- Note the detector is more sensitive in cold weather
4. Lights stay on
- Check unit has not gone into Manual Override mode.
- Light bulb sockets may be wired directly to the power source
- Recheck the wiring diagram
- Adjust time to minimum
- Ensure unit is firmly fixed to a solid object with no moving branches etc. in field of view.
- Ensure detector is not being activated by stray moving heat sources such as heating outlets,
car etc.
5. Lights switch on during storms
- Adverse weather conditions and temperature changes can result in unwanted activations.
- This can be minimized by mounting in a protected location
6. Maintenance and repair
- Do not attempt to repair as this could invalidate warranty or result in personal injury.
- Clean detector lens and outside casing with damp cloth
NOTE: This product is RoHS compliant
