3
1. Turn off the power at the main fuse box in your home(see Fig. 3).
2. Fix metal bracket on the wall with 2 Wood Screws (not included).
3. Fix halogen lamp to metal bracket with attached hardware.
4. Strip sheath and insulation of cable. Let conductors expose
approximate 6 mm.
5. Open cover of connection box.
6. Lead power wire through attached grommet.
LOCATION SELECTION
Selecting A Location
1. When mounted at the recommended height of 2M, the detection pattern extends 12M.
(see Fig. 5)
Fig. 4
Fig. 3
Fig. 5
2.0M
0
3
6
9
12M
TOP VI EW
SIDE VI EW
CAUTION:
PLEASE FOLLOW AC POWER CONNECTION
LABEL MARKINGS.
WRONG POWER CONNECTION WILL
DESTROY THIS SENSOR UNIT.
9
6
3
0
110
°
3
6
9
7. Connect wire to terminals as Fig. 4
8. Fix power cable (use plate. Ref K).
NOTE: 1. If more range is required, try
pointing the motion sensor slightly
upward, so that the 3rd Level of
vision can monitor an area above
your head.
2. Try to keep the quartz light as far
away as possible from the motion
sensor, as heat from the light may
confuse the motion sensor.
WARNING !! THIS UNIT MUST BE EARTHED
Connection box lid
SL104 CONNECTION DIAGRAM
LAMP
N
L
Blue wire
Green & yellow wire
230v ac supply cable
230v ac supply cable
Brown wire
Cable clamp
Connection box
*
THIS FITTING MUST BE EARTHED
Pre wired
connections
to lamp &
sensor
9. Close cover of connection box.
