79033093 D Rev.
01-13
Introduction
Lights, Reflector and Signs
FIG. 22:
Ensure all machine lights, reflectors and slow
moving vehicle (SMV) are installed, in good condition and
wiped clean.
Consult local law enforcement agency for local
regulations regarding movement of equipment on public
roads.
Fire and Explosion Prevention
FIG. 23:
All fuels, most lubricants and some coolant
mixtures are flammable.
Flammable fluids leaking or spilled onto hot surfaces or
electrical components can cause fire.
Fire may cause personal injury and property damage.
Remove all flammable materials such as fuel, oil and
debris from machine.
Store fuels and lubricants in properly marked containers
away from unauthorized persons. Store oily rags and any
flammable materials in protective containers.
Do not smoke in areas used for storing flammable
materials.
Do not operate machine near any flame.
Exhaust shields protect hot exhaust components from oil
or fuel spray in case of a break in a line, hose or seal.
Exhaust shields must be installed correctly.
Do not weld or flame cut on lines or tanks containing
flammable fluids. Clean any such lines or tanks
thoroughly with non-flammable solvent prior to welding or
flame cutting.
Check all electrical wires daily. Repair any loose or frayed
wires before operating machine. Clean and tighten all
electrical connections.
Dust generated from repairing non-metallic hoods or
fenders can be flammable and/or explosive. Repair such
components in a well-ventilated area away from open
flames or sparks.
Inspect all lines and hoses for wear or deterioration.
Hoses must be properly routed. Lines and hoses must
have adequate support and secure clamps. Tighten all
connections to recommended torque.
FIG. 22
N020903022
FIG. 23
N021603001
Find manuals at http://best-manuals.com/search?&s=CHAL-79033093
