79033093 D Rev.
01-7
Introduction
Wear gloves to handle wire cable and do not use kinked
or frayed wire cable.
Retainer pins can fly when struck, ensure there are no
personnel in area before striking. Wear protective glasses
to protect eyes. When striking objects, chips or other
debris may fly off. Ensure there will be no injury prior to
striking any object.
Exhaust Dangers
FIG. 9:
Diesel engine exhaust contains products of
combustion, potentially harmful to health. Always run
engine in a well-ventilated area. Never operate engine in
a closed building unless exhaust is vented outside.
Before Operation
Clear all personnel from machine and surrounding area.
Make sure all obstacles are cleared from machine's path.
Operator must be familiar with hazards (wires, ditches,
fences, etc).
Be sure all windows are clean. Secure doors and
windows in open or closed position.
Adjust rearview mirrors for best visibility close to machine.
Make sure horn, backup alarm (if equipped) and all other
warning devices are working properly.
Fasten seat belt securely, low around hips.
Parking
Park on a level surface. When parking on a grade, chock
machine tires.
Move transmission control lever to PARK and lower all
implements to ground. Move implement controls to HOLD
position.
Before stopping engine, move throttle control lever to
LOW IDLE position. Allow turbocharger to cool by running
engine at low idle speed for five minutes.
Stop engine, turn engine start switch to OFF and remove
engine start switch key.
Turn battery disconnect switch to OFF position.
FIG. 9
N020903009
Find manuals at http://best-manuals.com/search?&s=CHAL-79033093
