Challenge CHAMP 150, Руководство оператора

Страница: 11 / 26

5.0 Installation & Setup
11
Next, use the provided plywood board as a ramp by first placing it in position as shown in Figure 5.
Then secure the ramp to the skid using the provided nails. There are pre-drilled holes in the plywood
board, indicated by red circles.
Figure 5
Make sure the casters are not locked and very carefully roll the machine down the ramp (Figure 6).
BE SURE TO USE 2 PEOPLE TO DO THIS SAFELY!
Figure 6
The CHAMP 150 may now be rolled into its final position. Replace the lower front cover.