Cordless Grass Trimmer
ORIGINAL INSTRUCTIONS
2. Snugly and evenly wind the line onto the
spool in the direction of the arrow on the
spool,(Figure K),until the line builds up to the
notches in the spool rim. Do not overfill spool.
The spool holds about 6.5 m of line.
K
3 mm
MAINTENANCE
1. After use, remove the battery pack from the
trimmer;
2. When not in use store the machine out of
the reach of children;
3. Use only manufacturer recommended
replacement parts and accessories;
4. Your trimmer line can dry out over time. To
keep your line in top condition, store spare
pre-wound spools or bulk line in a plastic,
sealable bag with a tablespoon of water.
5. To clean the tool, remove battery pack and
use only mild soap and a damp cloth to clean
the tool. Do not immerse tool in water or squirt
it with a hose. Do not allow any liquid to get
inside it. Do not clean with a pressure washer.
6. The line cutter on the edge of the guard
can dull over time. It is recommended you
periodically touch-up the sharpness of the
blade with a file.
Model No.
Voltage
Battery type
No-load speed
Cutting width
Battery capacity
Battery charging time
TECHINICAL DATA
N0E-5ET-230
Ni-Cd
18VDC
8000 /min
230 mm
1.7Ah
3-5 hours
A weighted sound pressure
A weighted sound power
Wear ear protection
Typical weighted vibration
NOISE AND VIBRATION DATA
80dB(A) K
PA
: 3dB(A)
96dB(A) K
PA
: 3dB(A)
2.3m/s
2
K=1.5m/s
2
Cordless Grass Trimmer
ORIGINAL INSTRUCTIONS
WARNING!
The vibration emission value during actual use of the power tool can differ form the declared value
depending on the ways in which the tool is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials is cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand vibration syndrome if tie use is not adequately managed.
WARNING!
To be accurate, an estimation of exposure level in the actual conditions of use should also take
account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Help to minimize your vibration exposure risk.
Maintain this tool n accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist.
Check with your Local Authority or retailer for recycling advices.
GUARANTEE
This product is selected for DOMESTIC USE ONLY and not for business use. This product is
guaranteed against manufacturing defects for a period of 12 months. This does not cover the
product where the fault is due to misuse, abuse, use in contravention of the instructions, or
where the product has been the subject of unauthorised modifications or alterations, or has been
the subject of commercial use. In the event of a problem with the product within the guarantee
period please return it to your nearest Argos store. If the item is shown to have an inherent defect
present at the time of sale, the store will provide you with a replacement. Your statutory rights
remain unaffected.
Guarantor: Argos , MK9 2NW
Issue1 11/2010
