9
8
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
Operating the Grass Trimmer
Step 2 - Starting the Engine (continued)
5) Use your left hand to hold the appliance firmly by the rear handle.
6) Pull out the pull cord until you feel resistance. Then pull vigorously 3 to 4 times. When the
engine ticks over (the engine has ignited).
7) Set the choke lever to the mid-position (HALF CHOKE).
8) Pull the start grip (
D
) again quickly and strongly until the motor runs.
9) After about 30 seconds of warming up and getting up to speed you can operate the machine.
2b Start it in warm condition as following steps
1) Set the switch to ( I ).
2) Set the choke lever to (RUN).
3) Pull the starter grip (
D
) quickly until engine runs.
2e Running Throttle Position
Hold the trimmer with the right hand on the rear handle and the left hand on the front handle.
Press and hold the throttle lockout trigger (
E
)and squeeze the throttle trigger (
F
) as required.
NOTE!
Keep a firm grip with both hands while in operation.
NOTE!
The trimmer should be held in a comfortable position with the rear handle about hip
height.
NOTE!
Always operate trimmer at full throttle.
WARNING!
Never operate this unit on the operator’s left side.
Step 1 - Removing the blade protector
Operating the Grass Trimmer
Remove the blade protector.
Step 2 - Starting the Engine
2a To start a cold engine
1) Lay the machine on a flat surface free of growth. resting it on the motor and on the protective
hood.
2) Set START/STOP switch (
A
) to I .
3) Gently press primer bulb (
B
) often enough that no more bubbles are visible (approx. 7 times).
4) Set choke lever (
C
) fully downwards (FULL CHOKE).
Choke will automatically
return to 'Run' position
when Throttle is pressed
C
B
D
A
Step 3 - Trimming
F
E
Pull cord until motor runs
FULL CHOKE position
HALF CHOKE position
RUN position
