background image

HELPLINE NO 08454 505299

14

ORIGINAL INSTRUCTIONS

This product is selected for DOMESTIC USE ONLY and not for business use. This product is 

guaranteed against manufacturing defects for a period of 12 months. This does not cover the 

product where the fault is due to misuse, abuse, use in contravention of the instructions, or where 

the product has been the subject of unauthorised modifications or alterations, or has been the 

subject of commercial use. In the event of a problem with the product within the guarantee period 

please contact the service centre for assistance on 08454 505299. If the item is shown to have an 

inherent defect present at the time of sale, you will be provided with a replacement. Your statutory 

rights remain unaffected.

Guarantor: Argos Limited, MK9 2NW

DISPOSAL

 

GUARANTEE

Your Power Tool is supplied with a fitted plug, however if you need to fit a new plug follow the 

instruction below.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue - Neutral Brown – Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured blue must be connected to the terminal which is marked with 

N

The wire which is coloured brown must be connected to the terminal which is marked with the letter L

If a 13AMP (BS1363/A) plug is used, a 13A fuse must be fitted, or if any other type of plug is used a

13AMP fuse must be fitted, either in the plug or adapter, or on the distribution board.

Note: If a moulded plug is fitted and has to be removed take great care in disposing of the plug and

severed cable, it must be destroyed to prevent engaging into a socket.If the supply cord is damaged

it must be replaced by a service agent or a similarly qualified person in order to avoid hazard.

PLUG REPLACEMENT

Do not dispose of electrical appliances with your domestic waste!

The packaging comprises exclusively environmentally- friendly material. Dispose of it in 
your local recycling containers.
General inspection.
Regularly check that all the fixing .They may vibrate loose over time.

Содержание AJ56C
















Отзывы: