7
Safety Information
Important - Please read these instructions fully before starting assembly
General Safety Warnings (continued)
5) Battery tool use and care
a) Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
b) Recharge only with the charger specified by the manufacturer.
A
charger that is suitable for one type of battery pack may create a risk of fire
when used with another battery pack.
c) Use power tools only with specifically designated battery packs.
Use of
any other battery packs may create a risk of injury and fire.
d) When battery pack is not in use,
keep it away from other metal objects
like paper clips, coins, keys, nails, screws, or other small metal objects that
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
e) Under abusive conditions, liquid may be ejected from the battery;
avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
6) Service
• Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
Drill Safety Warnings
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can
cause personal injury.
2. Hold power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring.
Cutting accessory contacting a “live” wire may make exposed metal parts of
the power tool “live” and could.
Customer Helpline 0345 640 0800