SECTION 9
FURNITURE & SOFTGOODS
9-4
Class A
After replacing the battery, place the clock
back into the socket with the 12 at the 9 o’clock
position as shown, then rotate clockwise so it is
upright.
WOOD FURNITURE AND
CABINETRY
People are drawn to the natural beauty of
wood. At Winnebago Industries, our craftsmen
work with the art found in each piece of wood to
create cabinets of superior quality, backed by the
Winnebago Industries warranty.
•
Oak is a strong, open-grained hardwood that
ranges in color from white to pink and reddish
tones. Streaks of green, yellow and even black
may appear due to mineral deposits. Oak may
also contain wormholes and wild, varying
grain patterns. This distinct graining is
considered a desirable quality and has made
oak one of the most popular woods used for
cabinetry.
•
Maple is a close-grained hardwood that is
predominately white to creamy-white in
color, with occasional reddish-brown tones.
While maple typically features uniform
graining as compared to other wood species,
characteristic markings may include fine
brown lines, wavy or curly graining, bird's eye
dots and mineral streaks. These traits are
natural and serve to enhance maple's natural
beauty.
•
Cherry is characterized by its red undertones,
but may vary in color from white to a deep,
rich brown. Cherry is a close-grained wood
with fairly uniform texture, revealing pin
knots and curly graining. All wood will age
with time and the finish will darken. This is
especially true for cherry. This is a sought-
after quality in cherry cabinetry, and those
who select it expect this evolution.
No matter which species you choose for your
new Winnebago Industries motorhome
cabinetry, please keep in mind that no two pieces
of wood are exactly the same.
Stains are likely to exaggerate the difference
between open and closed grains and other
markings in wood. Grain variation and color
change should be expected. As hardwood ages, it
will darken when exposed to different types of
light. Color differences or changes in wood can
also be caused by exposure to harsh chemicals,
extreme heat or other contributing external
conditions.
Any color change that occurs in both the finish
and the wood is considered part of the natural
aging process and is not to be considered defect
or damage.
Additionally, wood species exhibit other
defining characteristics, such as mineral
deposits/streaks, knots, sap runs, pin holes and
wormholes. These markings make the wood
unique and contribute to its enduring beauty.
Therefore, since wood is a product of nature
and will have certain natural characteristics and
variances they are not covered under the
warranty.
