Normal function
1. Select audio source by pressing the INPUT key on the front panel or on the remote control.
When selecting AC-3 input, the machine can link decoder to 5.1 channel output.
2. Adjust the knob VOLUME/MULTI on the front panel or the key VOL+/- on the remote control to
adjust the setting of the main volume control to your listening level.
3. Press the MUSIC MENU key on the front panel or the key /- on the remote, then press -/+
to increase or decrease music treble effect.
Press the MUSIC MENU key on the front panel or the key BASS+/- on the remote, to increase or
decrease music treble effect.
4. Press the MUTE key on the front panel or on the remote control to mute, press it again to reset.
5. Press the MUSIC MENU key on the front panel or the DSP+/- key on the remote control, select
display mode.
6. Press the CH.MODE key on the front panel or the CH.MODE key on the remote control to select
channel mode. When select AC-3 input, it will be set on 5.1CH.
7. Press the FLV+/-, FRV+/-, SLV+/-, SRV+/-, CVOL+/-, SWV+/- key on the remote control to change
subwoofer, front speakers, surround speakers and centre speaker volume.
Karaoke function
1. The machine can auto detect whether MIC1 or MlC2 being inserted.
Please turn off microphone volume and adjust the volume gradually after inserting microphone.
2. Adjust the MlC.VOL/MULTI knob on the front panel or the M.VOL+/- key on the remote control to
adjust microphone volume.
3. Press the MIC MENU key on the front panel to display M.TRE or M.BAS, then adjust the knob MIC
VOL/MULTI, or press the /- or BASS+/- key on the remote control to change microphone
tone.
4. Press the MIC MENU key on the front panel to display ECHO, then adjust the VOLUME/MULTI knob,
or press the ECHO+/- key on the remote control to change microphone ECHO.
Note:
Please don´t touch the top of the microphone when singing to avoid howling effect.
Please adjust the microphone volume gradually to avoid howling effect.
HDMI reader Function
1. This unit has three HDMI input jacks and one HDMI output jack for digital audio and video signal
input/output. Connect the HDMl1,HDMl2,HDMl3 jack of this unit to the HDMI output jack of other
HDMI components (such as a DVD player).Connect the HDMI OUT jack of this unit to the HDMI
input jack of other HDMI components (such as a TV and a projector).
2. The video or audio signals input at the HDMI IN jacks of the selected input source are output at the
HDMI OUT jack of this unit.
ATTENTION:
This receiver works as an HDMI-hub. In order to listen to an ingoing HDMI audio signal another
HDMI-ready device - typically a TV - has to be connected to the HDMI output of this receiver. It is
not possible to listen to a HDMI audiosignal directly via this receiver.
Tuner Function
1. Before using radio functions, you must attach the supplied antenna. Adjust the antenna to obtain
optimum reception.
Press INPUT key on the front panel (amplifier)or on the remote control, to select "TUNER" function.
2. Press the CH+/CH- key on the remote control, to find the radio bands that you have listened to
before.
3. Press the TU+/TU- key on the remote control, to adjust the radio frequency manually.
4. Press the AUTO key on the remote control, the machine can scan radio channels from low-frequency
to high-frequency by itself and memorize the channels one by one.
5. Press the MEMO key on the remote control and it will memorize the current radio frequency on the
band. The machine can memorize at most 40 FM radio bands.
6. In FM mode.
Press the ST.MO key on the remote control, to select stereo or mono.
Содержание 10004932
Страница 1: ...AUNA 5 1 Surround Receiver 10004932...