Chal-tec 10004932, Быстрый старт, Страница: 10 / 14

Connection
Source Equipment Connections Instructions
1. While connecting, you should switch off power
supply, and after finishing connections, switch on
the unit again.
2. All plus should be inserted firmly, or noise will be
heard.
Source Audio and Video Equipment
Connections Instructions
1. While connecting audio device, you
should use RCA.
2. It should be right, that connecting right
speaker to right output, left speaker to
left output.
Speaker Connections Instructions
1. The speaker impedance should be correct
(read "Speaker Choice"), or could
damage this unit or speaker.
2. Do not let the bare speaker wires touch
each other or any other metal parts as
this could damage this unit or speakers.
3. Make sure the polarity of speaker wires is
correct, ―+‖ to ―+‖, and ―-― to ―-― if these
wires are observed, the sound will be
unnatural and will lack.
Connecting Speaker System
Connect the speaker terminals to your speakers wire of
proper gauge, cut as short as possible. Cut off the
insulation about 10mm from the wire, if the bare wire
is loose wiring it up.