CHAINTECH CT-6LTM, Руководство пользователя, Страница: 28 / 50

User's Manual
24
AUTO Configuration : Enabled
DRAM Speed Selection : 60ns
MA Wait State : Slow
EDO RAS# To CAS# Delay : 3
EDO RAS# Precharge Time : 3
EDO DRAM Read Burst : x333
EDO DRAM Write Burst : x222
DRAM Data Integrity Mode : Non-ECC
CPU-To-PCI IDE Posting : Enabled
System BIOS Cacheable : Disabled
Video BIOS Cacheable : Disabled
Video RAM Cacheable : Disabled
8 Bit I/O Recovery Time : 1
16 Bit I/O Recovery Time : 1
Memory Hole At 15M-16M : Disabled
Passive Release : Enabled
Delayed Transaction : Disabled
AGP Aperture Size (MB) : 64
SDRAM RAS-to-CAS Delay : Slow
SDRAM RAS Precharge Time : Slow
3-3 SeePU & Chipset Setup
By choosing the SeePU & Chipset Setup option from the CMOS SETUP UTILITY
menu(Figure 3-1), the screen below is displayed. This sample screen contains the
manufacturer's default values for the mainboard.
With the exception of the CPU Setup all of the above settings are standard
for your mainboard and should not be changed.
@
If professional engineers or customers would like to make some adjustments
to gain even better system stability and performance, please visit
http://www.award.com to search for helpful information.
A. Auto Configuration
When Auto Configuration is enabled, BIOS autodetects the DRAM module type
(i.e. EDO, FP) and determines the relevant DRAM settings. Note that these DRAM
settings become background print (unchangeable) once the Auto Configuration
is enabled. If Auto Configuration is enabled, you must set the DRAM timing
function to 60ns or 70ns, depeding on the type of DRAM you install.
Figure 3-4 Chipset Features Setup Screen
ROM PCI / ISA BIOS (2A69JC39)
SeePU & CHIPSET SETUP
AWARD SOFTWARE, INC.
:Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
SDRAM CAS Latency Time : 3
Power Failure Recovery : Disabled
Spectrum Spread : Disabled
Flash BIOS Protection : Disabled
Hardware Reset Protect : Disabled
***** CPU Setup ******
CPU Type
: Pentium-II-233
ESC : Quit
F1
: Help
F5 : Old Values
F7 : Load Setup Defaults