Chapter 3
7NJL1 User’s Guide
43
3.8 Frequency/Voltage Control
By choosing the Frequency/Voltage Control option from the CMOS Setup
Utility menu (Figure 3-1), the screen below is displayed. This sample screen
contains the manufacturer's default values for the motherboard.
Figure 3-8 Frequency/Voltage Control
FSB/AGP Spread Regulator:
This item is used to enable or disable the clock generator’s Spread Spectrum
feature. When over clocking the processor, always set it to
Disabled
. Setting
options: [
0.5%
], [
1.00%
], and [
Disabled
]
DIMM Voltage Regulator:
This feature allows the system memory to run at Power ON of Voltage.
AGP Voltage Regulator:
This feature allows the AGP bus to working of Voltage.
CPU Voltage Regulator:
This feature allows the CPU to working of Voltage. Available options are
[
1.400V
] to [
2.150V
].
WARNING
Overclocking
This motherboard is designed to support
overclocking. However, please make sure your
components are able to tolerate such abnormal
setting, while doing overclocking. Any attempt to
operate beyond product specifications is not
recommended.
We do not guarantee the damages
or risks caused by inadequate operation or beyond
product specifications.
Chapter 3
44
7NJL1 User’s Guide
3.9 Load Fail-Safe Defaults
Load Fail-Safe Defaults loads the default BIOS values directly from the
CMOS Setup Utility menu (Figure3-1). If the stored record created by the
setup program becomes corrupted and therefore unusable, these defaults will
be loaded automatically when you turn on the computer.
3.10 Load Optimized Defaults
Load Optimized Defaults loads the default system values directly from the
CMOS Setup Utility menu (Figure3-1). If the stored record created by the
setup program becomes corrupted and therefore unusable, these defaults will
be loaded automatically when you turn on the computer.
3.11 Supervisor Password & User Password Setting
There are four different variables that control password settings. The first
two are located under the Security Option function in BIOS Features Setup
Menu (Figure 3-1). When the Security Option function is set to
Setup
, a
password is required to enter BIOS and change BIOS settings. When the
Security Option function is set to
System
, a password is required to enter both
BIOS and the computer's operating system (for example Windows 98) found
on the boot drive.
The third and fourth variables are user password and supervisor password
selected in BIOS (Figure 3-1). The main purpose of separating user and
supervisor is to allow only the supervisor to have control over the settings in
BIOS. The user, on the other hand, is only allowed to access the computer's
operating system and change the user password in BIOS.
Note:
that when there is no supervisor password set, the user password
controls
access to all BIOS settings.
