CHAINTECH 6BDU0, Руководство пользователя

Страница: 12 / 56

Chapter 2
8
2-2 Installing an S.E.C. Processor in Slot 1
1. Insert the Pentium II processor into the retention mechanism. Press evenly and
gently until the snaps on the upper side of the processor have been inserted into
the holes at the top of the retention mechanism.
2. Note that when removing the processor, these snaps should be clicked into a
completely vertical position, leaving your hands free to stabilize the board. Pull
the processor evenly and gently out of the retention mechanism.
3. Also note that like PCI and ISA slots, Slot 1 has a divider that prevents backwards
insertion of the CPU.
Installing a heat sink with cooling fan is necessary for proper heat dissipation
from your CPU. Failing to install these items may result in overheating and
possible burn-out of your CPU.
2-3 Setting Your CPU's Parameters( SeePU Technology)
SeePU is a new user friendly technology that enables the user to setup a mainboard's
CPU parameters through an easy to use BIOS setup procedure. It is no longer necessary
to make many jumper settings as on conventional mainboards.
1. After installing all your hardware into your PC system, turn on your system's
power. Enter the CMOS Setup Utility by pressing the Delete key when your
BIOS identification screen appears.
2. Move the cursor to SeePU & Chipset Setup menu and press Enter. Find the CPU
Setup commands at the right hand side of the BIOS screen (Figure 2-2) Commands
for operating the cursor in BIOS are found at the Bottom right of the BIOS screen.
ROM PCI / ISA BIOS (2A69KC39)
SeePU & CHIPSET SETUP
AWARD SOFTWARE, INC.
E S C : Quit
F1 : Help
F5 : Old Values
F7 : Load Setup Defaults
:Select Item
P U / P D / + / - : Modify
(Shift) F2
: Color
Figure 2-2 Figure 2-2 Figure 2-2 Figure 2-2 Figure 2-2
Power Failure Recovery : Disabled
Spectrum Spread : Disabled
Flash BIOS Protection : Disabled
***** CPU Setup *****
CPU Type :350MHz (100*3.5)
SDRAM CAS Latency Time : Auto
SDRAM Precharge Control : Disabled
DRAM Data Integrity Mode : Non-ECC
System BIOS Cacheable : Disabled
Video BIOS Cacheable : Disabled
Video RAM Cacheable : Disabled
8 Bit I/O Recovery Time : 1
16 Bit I/O Recovery Time : 1
Memory Hole At 15M-16M : Disabled
Passive Release : Enabled
Delayed Transaction : Enabled
AGP Aperture Size (MB) : 64