CHAINTECH 6AJM2 Скачать руководство пользователя страница 52

Страница: 52 / 54

Chapter 4

Backup System

Smart Backup

1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Selet Backup System by pressing Alt+F1 key.

2. Select your hard drive to backup.

3. Wait for the backup process to finish and the system will automatically reboot.

Equivalent Backup

Still under evaluation testing for future Windows 2000/NT supports.

Disk Information

1. Upon system boot up, the HDD Instant Recovery Utility will be shown on

the screen. Select Disk Information by pressing Alt+F2 key to view Disk Info.

Restore System

1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Selet Restore System by pressing Alt+F3 key.

2. You will be prompt to confirmed restore drive. Type Y and press Enter key.

3. Wait for the backup process to finish and the system will automatically reboot.

Defragmenter

1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Selet Defragmenter by pressing Alt+F4 key.

2. You will be prompt to confirmed defragment your drive. Type Y and press
Enter key.

3. Wait for the defrgmentation process to finish and the system will automatically
reboot.

Hard Disk Copy

1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Selet Hard Disk Copy by pressing Alt+F5 key.

2. Select which hard drive to backup.(Copy 1 to 2 or 2 to 1 or 1 to 2 3 4)

3. Wait for the hard disk copy process to finish and the system will auto reboot.

Uninstall

1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Seletc uninstall by pressing Alt+F6 key.

2. You will be prompt to confirmed uninstall. Type Y and press Enter key.
3. Wait for the uninstalling process to finish and press any key to reboot

This function does not support Multi-Booting management utility like
System Commander, etc.

Alway uninstall this function before you format or partition the hard disk
for other usage.

6aja2m2-a3.p65

2000/6/13, PM 03:37

Содержание 6AJM2























































Результаты поиска

Содержание 6AJM2

Отзывы:

Похожие инструкции для 6AJM2

Бренды по названию

Популярные бренды

CHAINTECH 6AJM2, Руководство пользователя

Результаты поиска

Содержание 6AJM2

Отзывы:

Похожие инструкции для 6AJM2

Бренды по названию

Популярные бренды