manualshive.com logo in svg

chadwick 1677-2, Руководство пользователя, Страница: 33 / 33

Поделиться
Скачать
chadwick 1677-2 Скачать руководство пользователя страница 33

 
 
 

 

                                 June 5, 2012 

 
Chadwick Engineering Ltd. 

TITAN Trainer Equine Treadmill 

Model 1677-2 

 

 

Publication No 1760-260-R1 
 

 

 

 
 

 

 

                     Chadwick Engineering Ltd. - 

TITAN Trainer

 Model 1677-2 

                    Installation – Operation – Maintenance 

                      Page 33 of

 

33 

8.3 

Maintenance 

 

Training data is stored in the report tool database.  After storing trainer logs from years of 
service, the amount of training data can increase to a volume that will slow the operation of 
the report tool processing.   Portions of the database can be purged/deleted to increase 
report/chart generation speed.  From this ribbon tool, the user may 
 

 

Purge all records in the database. 

 

Purge all records for a given time period. 

 

Purge all records for a selected horse.

 

 

Take caution when purging the database, as this operation cannot be undone.  In the event of 
accidental removal of training logs, trainings logs may be re-uploaded into the database 
simply by copying the training logs out of the TTDataBackups folder to a temporary folder and 
then uploading from this location.   

 

8.4 

Backup Database 

 

The report tool database can be backed up by clicking the ‘Backup Database’ button on the 
ribbon toolbar.  Click this button and a file save window will open; select the file save location 
and click save to complete the backup process.   
 
To restore a backup database, simply replace the database file (C:\Program Files\TITAN 
Trainer\Titan Trainer Report Tool V1.0_BE.accdb) with the backup database file. 
 

8.5 

 Exit Report Tool 

 

Select ‘Exit Report Tool’ button to close the report tool database.  Exiting the report tool in this 
manner will compact and repair the report tool database. 

 

8.6 

About 

 

The ‘About’ button opens a report tool software information window. 

 
 

9.0   Warranty 

 
 

Equipment warranty covers a period of two years from date the equipment arrives at the customer’s 

location.  Chadwick Engineering Ltd. warrants its products to be free of defects in material and 
workmanship.  Equipment misuse or lack of routine maintenance is not covered by this warranty.  This 
warranty covers all components of the treadmill except consumables, i.e. Belt Lubricant is not included.  In 
no event shall Chadwick Engineering Ltd. be liable for consequential damages.   

 
 
 
 

Содержание 1677-2


































Отзывы:

Нет отзывов