June 5, 2012
Chadwick Engineering Ltd.
TITAN Trainer Equine Treadmill
Model 1677-2
Publication No 1760-260-R1
Chadwick Engineering Ltd. -
TITAN Trainer
Model 1677-2
Installation – Operation – Maintenance
Page 5 of
33
1.2
Specifications
Overall Dimensions (with ramps)
20’-9”L x 6’-4”W x 6’-7”H
Deck Dimensions
3’ Wide x 10’ Long
Height (above deck)
5’-2”
Weight
3500
lbs
Speed
0 to 15 mph
Incline
0 to 8 deg
Belt Drive Motor
10 HP
Incline HPU Motor
1 HP
Electrical Power
208 - 230 VAC, 1 Ph, 50 Amp.
Ambient Operating Temperature
5 to 40 ºC
2.0
Safety
2.1
Operator Safety
As always, when working with horses, care must be taken so that neither
the handler nor the horse is put in an unsafe position especially around new
unfamiliar equipment.
CRUSHING HAZARD !!
The
TITAN Trainer
is powered to an incline position (maximum angle is
8 degrees). At no time shall anything be placed under the machine since it
could be crushed when the machine returns to the level position. In
Automatic Mode, the frame UP/DOWN motion is controlled by the program,
i.e. not initiated by the operator. In the case of an Emergency Stop, the
treadmill belt will stop and the incline will not change. Once the E-stop is
reset and the power is reapplied the treadmill will return to its level position.
This crushing hazard could result in serious injury or death. Special care
shall be taken to keep children away from this machine when it is powered!!!
