Assembly Instructions
Step 1
There are a total of 9 pieces of
tubing parts that are needed to
assemble the frame. All parts
with the same part number are
interchangeable.
To connect the parts, simply
slide a section (male) of tubing
that is smaller on one end into
the adjacent section (female)
that has a larger opening. These
joints are called “connector
points”.
Lay out all parts according to the
diagram.
Step 2
A.
Two people will be necessary
at this point to assemble the
trampoline. Lift the support
a s s e m b l y f r o m S t e p 1 t o a
standing (vertical) position as
shown in FIGURE 2. Insert
the Top Rail with Leg Socket
into the one end of the support
assembly. Insert opposite end
of the Top Rail with Leg Socket
into a second support assembly.
M a k e s u r e h o l e s o n m e t a l
pieces are facing the outside of
the trampoline, this is important
for installing the enclosure.
Repeat the above step until all
the support assemblies have
been attached to the Top Rail
with Leg Socket.
B.
Install the Top Rail (#4)
into the gaps between the
Vertical Leg Extensions by
inserting them into the slots
as shown in FIGURE 3.
3
5
4
3
5
3
4
5
FIGURE 1
FIGURE 2
FIGURE 3
4
