3
PREPARING THE CHAD-O-CHEF GAS GRILL FOR USE
•
Make sure that the protective film is removed from all surfaces before using
the appliance.
•
Place a single layer of the Wood or Charcoal evenly over the Ember
Drawer, no higher then 80mm. Adding excessive wood will result in poor
proformance and componant faliure.
•
Use only the best wood available. The use of poor quality wood may result in
poor performance.
•
Ensure that the regulator is properly connected to the cylinder and that the
connections have been checked to ensure there are no gas leaks present.
•
Check that all burners, braai Grids and the Ember Drawer are in the correct
position.
•
Check that there are no flammable materials close to the appliance.
•
You are now ready to light the CHAD-O-CHEF Gas Grill for the first time.
