MAINTENANCE /
REP
AIR
TROUBLESHOOTING
OPERA
TION
ASSEMBL
Y /
INST
ALLA
TION
SAFETY /
SPECIFICA
TIONS
GETTING ST
AR
TED
7
GETTING TO KNOW YOUR UNIT
NOTE:
Photographs and line drawings used in this manual are for reference only and do not represent a specific model.
Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.
NOT SHOWN:
Detergent Siphon Hose:
Feeds cleaning agents into the pump to mix with the water. See How To Apply Chemicals/Cleaning Solvents
instructions in Operation section.
High Pressure Hose:
Carries the pressurized water from the pump to the gun and spray wand.
Spray Gun:
Connects with spray wand to control water flow rate, direction and pressure.
Spray Wand:
See How To Use Spray Wand instructions in Operation section.
BASIC ELEMENTS OF AN ENGINE
Refer to the Engine Owner’s Manual for location and operation of engine controls.
Choke Control:
Opens and closes carburetor choke valve.
Starter Grip:
Pulling starter grip operates recoil starter to crank engine.
Engine Switch:
Enables and disables ignition system.
Figure 1 - PW320200
Engine:
Drives the high
pressure pump. Refer
to the Engine Owner’s
Manual for location
and operation of engine
controls.
Handle
Frame
High Pressure Pump:
Increases the
pressure of the water supply.
Pump Outlet
Pump Inlet
Quick Connect Nozzles
