CH M1.1, Руководство пользователя

Страница: 36 / 42

4.3.1.5 INSTALLED OPTIONS
The M1.1 SETUP >> INSTALLED BOARDS menu provides read-only information
about installed back panel boards. Details are:
- ANALOG IN 1:
- ANALOG IN 2:
Input board installed in Slot 1
Input board installed in Slot 2
The following table details the Parameters of the INSTALLED BOARD menu:
PARAMETER PARAMETER VALUES REMARKS
ANALOG IN 1, 2 Analog in Left, Analog in Right, - Parameters are Read Only
Details of INSTALLED OPTIONS menu Parameters
4.3.1.6 NETWORK
The M1.1 SETUP >> NETWORK menu display the information and allows the
customization of the network related Parameters of the unit. Accessible
Parameters are:
- STATUS:
- ROLE:
- ROOM NUMBER:
- IP SETTINGS:
- WAKE-ON-LAN:
Listing of all CH products detected (product type, IP and
MAC addresses
Defines how the M1.1 interacts with other devices on the
network
Group units connected to a single network by room
Low-level network configuration
Select if the unit can be powered on from the network
The following table details the Parameters of the NETWORK menu:
PARAMETER PARAMETER VALUES REMARKS
STATUS IP address
Product type
MAC address
List of CH Precision devices and Android remote controls detected
by the M1.1 (product type, IP and MAC addresses)
Read Only parameters
ROLE Offline
Power master
Master
When physically connected to a network, the M1.1 can ignore
this network (offline) or connect to it as being the master or as a
slave.
36 M1.1 User Manual Rev 3.0
M1 SETUP >> INSTALLED OPTIONS
ANALOG IN 1
ANALOG IN 2
Analog in left
Analog in right
M1 SETUP >> NETWORK
ROLE
STATUS
Master
1 device connected
ROOM NUMBER 1
IP SETTINGS
Auto (DHCP)
WAKE-ON-LAN
Only if PoE