CH M1.1, Руководство пользователя

Страница: 19 / 42

ANALOG IN panel layout
3.3.3 Power cord receptacles and voltage selection
Make sure that the voltage selection is set to the correct value with respect to the AC voltage in your location. Connect the power
cords to the power cord receptacles and plug the power plug to two separate phase AC wall sockets, only after all other connections
have been made.
3.4 Amplifier modes
This section describes most standard setups in which one or multiple M1s can be integrated into.
3.4.1 Stereo mode
A single M1.1 equipped with two analog input boards can be used as a stereo power amplifier. This is the simplest configuration
that already allows to enjoy the unique sound of the M1.1 amplifier. The picture below shows how it should be connected in this
case.
Stereo mode
3.4.2 Monaural mode
This configuration should be used when low efficiency low impedance loudspeakers are used in large rooms. The picture below
shows how a pair of M1s should be connected in this mode:
Rev 3.0 M1.1 User Manual 19
L1 preamplifier
M1 Stereo Power Amplifier
Left Speaker Binding Post Right Speaker Binding Post
Balanced XLR cables