background image

Installation, Operation & Maintenance                                                                                   Merlin CO2 TFT

 

 

 

Rev 1   05-21 

3  

 

 

 

Important Warning Statements 

 

Please take the time to thoroughly read this user’s guide which should be retained for future reference. 
The expected lifetime of the gas sensor elements is 10 years upon initial power up.  
The device will display a message to indicate its end of life and should immediately be replaced. 
It is recommended that this device be commissioned upon installation and serviced annually. 
Do not apply lighter gas or other aerosols to the device – this will cause extreme damage. 
High concentrations of alcohol found in many products may damage, deteriorate or affect the gas sensing 
elements. 
This device is designed to monitor carbon dioxide gas and temperature only. It is NOT designed to detect 
smoke, fire or other gases and should NOT be used as such. 
Never ignore your device when in alarm. 
This device requires a continual supply of electrical power – it will not work without power. 
This device should not be used to substitute proper installation, use and/or maintenance of fuel burning 
appliances including appropriate ventilation and exhaust systems. 
This device does not prevent dangerous gasses from occurring or accumulating. 
Actuation of your alarm indicates the presence of dangerous levels of CO

2

 or high temperature.  

This unit may not fully safeguard individuals with specific medical conditions. If in doubt, consult a 
doctor/physician. 
Your product should reach you in perfect condition, if you suspect it is damaged, contact your supplier. 
 

 
 

Manufacturer’s Warranty 

 

Warranty coverage: The manufacturer warrants to the original consumer purchaser, that this product will be free of defects in 
material and workmanship for a period of three (3) years from date of purchase.  
The manufacturer’s liability hereunder is limited to replacement of the product with repaired product at the discretion of the 
manufacturer. This warranty is void if the product has been damaged by accident, unreasonable use, neglect, tampering or other 
causes not arising from defects in material or workmanship. This warranty extends to the original consumer purchaser of the 
product only. Warranty disclaimers: Any implied warranties arising out of this sale, including but not limited to the implied 
warranties of description, merchantability and intended operational purpose, are limited in duration to the above warranty period. In 
no event shall the manufacturer be liable for loss of use of this product or for any indirect, special, incidental or consequential 
damages, or costs, or expenses incurred by the consumer or any other user of this product, whether due to a breach of contract, 
negligence, strict liability in tort or otherwise. The manufacturer shall have no liability for any personal injury, property damage or any 
special, incidental, contingent or consequential damage of any kind resulting from gas leakage, fire or explosion. This warranty does 
not affect your statutory rights. Warranty Performance: During the above warranty period, your product will be replaced with a 
comparable product if the defective product is returned together with proof of purchase date. The replacement product will be in 
warranty for the remainder of the original warranty period or for six months – whichever is the greatest.  
 
 
 

Information on waste disposal for consumers of electrical & electronic equipment. 

 

When this product has reached the end of its life, it must be treated as Waste Electrical & Electronics Equipment (WEEE). Any 
WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and 
recycling of the materials used. Please contact your supplier or local authority for details of recycling schemes in your area. 

 

Alternatively, CGS products can be securely packaged and returned clearly marked for disposal.  

 
 
 
 

 
 

Содержание Merlin CO2 TFT













Отзывы: