CG Emotron VS30, Инструкция по монтажу и включению

Страница: 17 / 24

17
Commissioning
Important notes
5
5 Commissioning
5.1 Important notes
Incorrect settings during commissioning may cause unexpected and dangerous motor and system
movements.
Possible consequence: death, severe injuries or damage to material assets
▶
Clear hazardous area.
▶
Observe safety instructions and safety clearances.
5.2 Before initial switch-on
Prevent injury to persons and damage to material assets. Check the following before switching on the
mains voltage:
• Is the wiring complete and correct?
•
Are there no short circuits and earth faults?
• Is the motor circuit configuration (star/delta) adapted to the output voltage of the inverter?
•
Is the motor connected in-phase (direction of rotation)?
•
Does the "emergency stop" function of the entire plant operate correctly?
WARNING!