CFR 10416A, Инструкция по эксплуатации

Страница: 13 / 24

CFR CASCADE
13
General
1. Wipe down the equipment with a damp cloth.
Do not use abrasive chemicals or solvents.
2. Remove clear plastic lid for storage.
Hand tools & wands
1. Rinse opening of tool with water to eliminate any debris.
2. Wand only – open and clean in-line strainer.
A. Disconnect the In-line Strainer by using the quick
disconnect coupler.
B. Remove the filter and rinse with water.
C. Remove any debris from the strainer.
D. Keep o-ring and threads of the plug lubricated.
CFR DEFOAM is a good lubricant or use a
non-petroleum based lubricant. This will ensure a
tighter seal.
3. Wipe tool with damp cloth and store with head up to
prevent clogging of nozzle.
OPTIONAL ACCESSORIES
Wand and Tool Usage
Attaching Wand/Hand Tool
The Cascade self-contained cleaning system works with all
CFR wands and tools. To attach a wand or hand tool:
1. Verify that all power is off.
• Turn speed dial to 0.
• Turn pump switch off
• Turn vacuum switch off.
2. Disconnect the vacuum hose on the Cascade.
3. Connect the wand hose to the vacuum intake.
4. Connect the solution hose using the quick disconnect.
5. Prime solution hose by placing hose end in tank
(without tool attached)
6. Turn the vacuum switch on.
7. Turn the pump switch on.
8. Engage trigger until trapped air is removed from the line.
9. Verify the p.s.i. setting.
10. Attach optional accessory.
A
B