119
Maintenance
To Change the Engine Oil
1�
Start the engine and allow it to warm up for (2~3) minutes, then
stop the engine�
2�
Place an oil pan under the engine to collect the used oil, and
then remove the dipstick�
3�
Remove the engine oil drain bolt (1) to drain the oil from the
crankcase�
To Change the Oil Filter
1�
Remove 3 engine oil bolts (1), open the filter cover (2) to take
out the filter.
2�
Replace with the new oil filter(3).
NOTE
Make sure the O-ring (4) is well and installed in the box.
3�
Install the new oil filter (3) and fix the 3 bolts (1) in the oil filter
cover (2). Tighten it to specified torque.
NOTE
Engine oil bolt (1) tightening torque:
7.3 ft-lb. (
10 N·m)
1
Drain bolt, Engine oil
1
1
Engine oil bolt
2 Filter cover
2
1
Содержание CF1000UU
