manualshive.com logo in svg

CF MOTO CF1000UTR-2, Руководство пользователя, Страница: 86 / 179

Поделиться
Скачать
CF MOTO CF1000UTR-2 Скачать руководство пользователя страница 86

82

OPERATING YOUR VEHICLE

CAUTION

Allow the engine to warm up for a short period before operating the vehicle. Operating the vehicle 

immediately after starting could cause engine damage.

Shifting the Transmission

CAUTION

To avoid transmission damage, return the throttle to the closed position, stop the vehicle, and apply the foot 

brake before shifting.

NOTE:

Low gear is the preferred transmission gear selection for all forward motion other than prolonged high speed 

travel.

Shifting out of Park

1.  Verify the throttle is closed.

2. 

Apply the foot brake and press the gear selector button.

3. 

Shift to the desired gear by moving the gear selector along the shift guide.

Shifting: Neutral to High Gear

1.  Verify the throttle is closed and the vehicle is stopped completely.

2. 

Apply the foot brake.

3. 

Shift to ‘H’ by moving the gear selector along the shift guide.

Содержание CF1000UTR-2




















































































































































































Отзывы:

Нет отзывов