CF MOTO CF1000UTR-2 Скачать руководство пользователя страница 74

Страница: 74 / 179

CONTROLS AND FEATURES

CVT System

This vehicle has a Continuously Variable Transmission (CVT)

system that utilizes a drive belt and clutch pulleys to automatically

vary transmission drive ratios, allowing infinite variability between

the highest and lowest vehicle speeds with no discrete steps or

shifts. The CVT system consists of a primary clutch

, which is an

advanced form of centrifugal clutch that is mounted to the engine

crankshaft

. If equipped, the primary clutch may also contain a

one-way bearing that creates an engine braking feature to slow the

vehicle without having to use the brakes.

The secondary clutch

is mounted to the input shaft of the

transmission

and serves two functions; As a “slave” pulley to the

primary clutch, and to provide a torque sensing element that shifts

drive ratios.

The drive belt

is a heavy duty V-belt that connects the engine

and transmission clutch pulleys.

A CVT housing and cover encloses the clutches and belt assembly.

There are inlet and outlet cooling ducts that route air to cool the

components, and they should be regularly inspected.

The CVT components do not contain any user maintenance items.

Contact your dealer for service.

Содержание CF1000UTR-2




















































































































































































Результаты поиска

Содержание CF1000UTR-2

Отзывы:

CF MOTO CF1000UTR-2, Руководство пользователя, Страница: 74 / 179

Результаты поиска

Содержание CF1000UTR-2

Отзывы: