Ceyear 87230 Series, Быстрый старт

Страница: 13 / 27

2 Preparation before use
2.1 Preparation before Operation
6
2.1.3 Power on/off
1) Host system requirements
The 87230 series USB CW power sensor shall be applied with the standard USB mini-AB socket, and
shall be subject to power display or direct remote control on the computer or other test instrument with
USB host interface.
Before using the USB CW power sensor, please ensure that the host satisfies the following
requirements:

The computer or any hardware device with a USB host interface;

Support Windows98SE/ME/XP/2000/2003/Win7/WIN10 or higher version;

The host is installed with the version above VISA 3.0 and the virtual power test panel provided along
with the machine;

It is also available for programming through the remote programming software including Microsoft®
Visual Basics, C++ and LabVIEW.
2) USB cable selection
The 87230 series USB CW power sensor is equipped with special USB cable, which can be screwed
and fixed on the body, as shown in Fig. 2.1. The user can also use his own USB cables, but shall ensure
that cables satisfy the international safety standards.
Prevent personal injury and damage to the instrument.
Poor contact or wrong wiring may lead to instrument damage or even personal injury. Therefore, the
users are recommended to use the USB cable provided by us. If other non-standard cables shall be
used, please contact our technical personnel.
Fig. 2.1 Fixable USB Cable
3) Charge of the instrument
The 87230 series USB CW power sensor is applied with the computer standard USB interface. Table 2.3
lists the power supply requirements of the 87230 series USB CW power sensor during normal operation.
WARNING
!
Fixed nut
Sealing ring
Mini USB connector