- 37 -
Screen
-M13.5-
The parameter’s actual value appears (0.0 °C default setting if
you have not already altered it) in field 16 (see page 6). If you
wish to change it click
to enter the menu.
To proceed with the change turn the selector until you have
found your desired setting and click
to confirm.
CONTROL PROBE SELECTION
PROBE
INNER
This parameter lets you decide if the temperature adjustment
made by ENJOY should be based on the internal probe (default)
or the external probe (see above parameter “Outer probe
activation”).
If you decide to use the external probe to regulate ENJOY, once
you have completed the selection procedure you are dealing
with, the display will show at the beginning of the character
rows:
INN
16.0
To indicate that the temperature detected by the internal probe
is 16 °C, whereas that detected by the external probe that has
become the regulating probe, appears in field 16 (see page 6), in
the example 19.6°C (see
-M17-
).
