Instruction Handbook PFP-20hpKHL-MR
- 10 -
C.E.T. Fire Pumps Mfg. This handbook is subject to change without notice,
Contact your local C.E.T. dealer or C.E.T. direct to ensure you have the latest version.
4.
General instructions
This pump must only be operated by trained personnel.
WARNING: The hydraulic power of the pump discharge can cause
severe damage, even death. Never, upper any circumstance, point the
discharge hose toward a person or an animal, handle with care.
Highly contaminated water containing sand or rocks of diameters larger than
0.200” (5mm) could damage and shorten the lifespan of your pump. Always use a
strainer at the end of the suction hose. If you are not sure of the quality of the
pumped water, use a floating strainer to prevent drawing the sand or stone from
bottom source.
The Kohler CH640 engine runs on unleaded gasoline fuel (conform to Octane
rating of 87 (R+M)/2 or higher, research octane Number (RON) 90 octane
minimum, Gasoline up to 10% ethyl alcohol, 90% unleaded is acceptable) and
requires a quantity of 2 qt (1.9L) of oil (SAE10W-30/SAE5W-30/SAE 30) for a
running temperature range of -25°F (-31°C) to 105°F (41°C). (Refer to the engine
manual)
WARNING: Always stop the engine before refilling the fuel tank.
WARNING: The exhaust system will get very hot. If the engine
manufacturer recommendations are not followed it could also emit
sparks, which could set the nearby environment on fire
CAUTION: Read and understand the engine owner’s manual and this
instruction handbook before you start the engine.
