Fitting the Access Point
OMEGA FLEX
RF-NET Access Point
Page 21 of 34
The Access Point must be fitted at an easily
accessible location, e.g. near a ceiling or on a wall.
A suitable fitting position is for instance
above a door frame, at a height of about 2
metres and with as much distance to the nearest
object or wall as possible.
If the reception is good, install the Access Point with the ports
pointing downwards. However, also all other orientations are
possible, such as with the antenna pointing to the as shown in
the figure.
Wherever possible, you should check the reception before
the final fastening to determine the orientation of the Access
Point and the antenna.
For this purpose, put the Access Point temporarily into
service (see page 23 ff).
Verify the reception at your locking devices with the optional
RF-TRACE-MASTER (see page 17).
