Introduction
OMEGA FLEX
RF-NET Access Point
Page 11 of 34
5
Introduction
5.1
Description
The Access Point is part of the OMEGA-system.
It establishes the connection between the OMEGA locking
devices and the overall control centre via a radio frequency
(RF) link.
The master computer is a commercial PC with the OMEGA
software.
The Access Point is connected with the control centre via an
RJ45-Ethernet cable (10/100 MBit). The Access Point is thus
the network interface of the system.
The desired access authorizations are created in the control
centre and transmitted via the Ethernet to the Access Points.
The Access Points then transmit the authorizations over the RF
link to the locking devices.
In return, the log data are retrieved from the cylinders and
then fed back to the control centre via the Ethernet.
The wide range of the Access Points allows a wireless
deployment of locking cylinders and wall terminals. No further
installation work on your doors is required.
Parts of the software are covered by the BSD license. Please
notice the copyright notices under: copying liquorice.txt and
copying-gpl.txt.
