Fitting the Access Point
Access Point
27
Afterwards fit the case cover in the order described below:
Satisfy yourself that the cover gasket sits perfectly inside the
case cover.
Place the cover on the case again.
Fasten the case cover with the four fastening screws.
Fold the two trims back into their covering position.
This completes the fitting of the Access Point.
Satisfy yourself, that your locking devices are
operating in RF mode. Otherwise no connection
between Access Point and your locking devices is
possible.
To switch the locking devices into RF mode, you
require the optional RF-INI-MASTER card.
For further information, please refer to the operating
instructions of your locking devices.
