5.1.5 Reader 1–4
For the connection of readers and wall terminals.
Set the jumper settings in accordance with the interface configuration (RS485/Wiegand).
No.
Connection
Function
1
12 V
Power supply
2
GND
Ground. The signal voltages are measured against this cable.
3
RS485-A / Wiegand D1
4
RS485-B / Wiegand D0
5
LED green
Ground. The signal voltages are measured against this cable.
6
LED red
Ground. The signal voltages are measured against this cable.
Door controller connection to wall terminal:
www.ces.eu
Subject
to
change
without
notice.
BRO2323
VA1
