5.2 Removing the reader
Risk of damage Perform all work on and in the device with the power supply disconnected.
1. Disengage the locking bar. To do this, insert a screwdriver into the release
openings and press gently until the locking mechanism disengages.
2. Pull the locking bar out towards you.
3. Slide the reader upwards.
4. Lift the reader carefully away from the wall mount so as not to inadvertently
disconnect the cable.
The reader is removed.
www.ces.eu
Subject
to
change
without
notice.
BRO
2327
VA1
