21
Version 1.0
Section 4 Final Verification / Return to Service
Note: This is with the G3000 powered up in normal mode.
•
Select Home on the left GTC controller.
o
Select Utilities.
o
Select Setup.
o
Select Avionics Status.
o
Select the Airframe tab on the left side.
o
Verify that the configuration ID (CRC Number) matches the number determined in
Appendix A based on the options installed in the aircraft.
o
Select the LRU Info tab on the left side.
Verify that all the LRUs are showing green check mark.
o
Select the MSG button:
Verify there is no DB Mismatch message present.
Verify there is no Manifest message present.
Verify there is no Config message present.
•
If aircraft is equipped with a GDL 69, or GSR 56:
o
Select Home.
o
Select Weather.
o
Select Weather Selection.
Verify Connext Weather is present if equipped with a GSR 56.
Verify Sirius XM Weather is present if equipped with a GDL 69.
•
If the initial radar trims were not zero:
o
Select Home on the left GTC controller.
o
Select Aircraft Systems.
o
Select Maintenance.
o
Enter password CACCDMS.
o
Select Radar Trim.
Enter the Pitch and Roll trims recorded in section 1.
Return to Service Testing
•
For testing, complete section 7.17.1 in the Garmin G3000 LMM.
