1.7
GPS-207 Activation and Deactivation
On the bottom of the GPS-207 is the LED Indicator and Power Switch. The Power Switch has two
functions – it acts as a power switch and as an activation switch.
Deactivate:
Press and hold the power switch, located on the underside of the unit, for three to five
seconds to deactivate the GPS-207. The LED will go solid red and then go off. When the LED is off the
unit has been deactivated.
Activate:
To activate the GPS-207 press and hold the power switch for three to five seconds until the
LED blinks.
LED blinks 12 times within a 3 second period - the battery is in its highest range
LED goes on for one second, goes off for one second and then goes back on for one second - the
battery is within its normal voltage range
When the LED is off the unit is activated.
© CES Wireless Technologies Corp – 2012 Page
9 of 17
Figure 6: Bottom view of the GPS-207DC
