5.0
Turning the GPS-207 On and Off
The button/LED on the bottom of the GPS-207 has two functions. It acts as both the power switch and the
activation switch. Once the GPS-207 has been programmed with the GPS-207S programming software it
will be activated. If you do not wish to immediately deploy the device it should be turned off so that the
battery is not drained unnecessarily.
5.1
Turn off the GPS-207
To turn off the GPS-207 the button on the bottom of the device should be pressed and held for three to
five seconds. The LED will go solid and then off. Once off the device is turned off.
5.2
Turn on the GPS-207
To turn on the GPS-207 the button on the bottom of the device should be pressed and held for three to
five seconds. The LED will blink and then go off. Once off the device is turned on.
© CES Wireless Technologies Corp – 2012 Page
16 of 17
