System Manual
2018 Cervis, Inc.
11
2.7 MU-9X15 Fuse Information
Use Table 3 to find replacement fuse part numbers based on the rated input voltage rating for
your system.
Table 3. MU-9X15 Fuse Identification
Model
Fuse Package
Bank 1-4 Fuse P/N
F01 Fuse P/N
MU-9X15-HVA
5x20 MM Glass
0218005.HXP
0217002.H
MU-9X15-LVA
5x20 MM Glass
0218005.HXP
0217002.H
MU-9X15-LVD
5x20 MM Glass
0218005.HXP
0217002.H
2.8 MU-9X15 DIP Switch Configurations
The MU-9X15 utilizes eight DIP switches to allow for relay configuration of A/B cycling
sequences, configuring relays for 3 or 4-wire hoist control systems, configuration of Aux Relay A,
and configuration of Aux Relay B for momentary or latching control.
Figure 8. MU-9X15 SW01 DIP Switch Assignments
2.9 MU-9X15 Mode Definitions
Table 4. Switches 1 and 2 Mode Configurations
Mode
Definition
00
3-Motion. Bridge, Trolley, and Hoist 3 relays. A, B, and AUX functions available.
01
3-Motion. Bridge, Trolley 3 relays, Hoist 4 relays. A and B functions available, AUX
unavailable.
10
3-Motion. Bridge, Trolley, Hoist 4 relays. A, B, and AUX functions unavailable.
11
4-Motion. Bridge, Trolley, Hoist, 4
th
axis 3 relays. A, B, and AUX functions unavailable.
Table 5. DIP Switch 3: Applies to All Modes and All Transmitters
Name
Set Definition
AB BOTH/OFF
0
HH: Cycle pattern is A, B, Both.
MCB: middle position of A/B switch is BOTH.
1
HH: Cycle pattern is A, B, Off.
MCB: Middle position of A/B switch is OFF.
ASOC
LOCK
AUX
MO
M
/ LAT
AB MO
M
/ LAT
**
A/B C
YC
/ IND*
MODE
1
0
AB BO
T
H
/ O
F
F
UNUS
E
D
*Applies only to HH, only in MODE 00 and 01
**Applies only to HH, only in MODE 00 and 01, only if SW4 = 1
