DIN-9XWxR-MOD
U123.0.0
4
3.0
DIN-9XWxR-MOD Receiver Wiring
Figure 3 illustrates which of the bundled wiring harness wires connect to particular screw
terminals.
Note: Flying leads that are not connected on the job site either must be insulated at the wire
end or the wire must be disconnected from the appropriate terminal.
Figure 3. DIN-9XWxR-MOD Receiver Terminal Standard Wiring
RS-485/RS-422
RX+ RX
– GND
V+ V
– GND
K_COM K_NO TX+ N/A TX
–