Warrior CB-xW Transmitters
U114.1.1
10
If the
STOP
button is not up
– nothing will happen. If the
STOP
button is already up, push
it down; then pull it back up again.
All four LEDs light solid for 0.5 second:
Then, LED
B
lights solid for 1.5 seconds:
3. When the
RF
LED begins blinking rapidly:
The transmitter has established a communications link with the receiver. (This entire
process takes approximately five seconds.)
4. Press the green
HORN/START
pushbutton to energize the
receiver’s Main Line
Contactor (MLC) relays and begin remote operation of the equipment.
2.5
Turn CB-xW Transmitter Off
Three methods are available to turn the transmitter off:
To immediately stop all operations, push the
STOP
button down.
Do not activate any switch. Wait for the transmitter
’s built-in Switch Inactivity Timeout to
expire (standard time=four minutes).
Turn the keyswitch to the OFF position.
Note: Disregard Step 3 if your transmitter does not have a keyswitch.
