Cervis Warrior 32 HH2S-9XL10, Руководство пользователя

Страница: 7 / 15

HH2S-9XL10 Handheld Remote
1.0
Warrior Handheld Remote (HH2S-9XL10)
The HH2S-9XL10 handheld is a small, compact handheld remote control that interfaces with
Warrior 32 MU-9X15 receiver. The HH2S-9XL10 is made up of ten two step actuators. The
HH2S-9XL10 utilizes two AAA batteries for power. The HH2S-9XL10 enclosure is constructed of
rugged polycarbonate designed to meet an ingress protection rating of IP55 according to IEC
60529. The unit has four diagnostic LEDs that indicate wireless link, Battery, A and B selection.
Figure 2. HH2S-9XL10 LED and Button Descriptions

Note: The HH2S-9XL10 handheld remote button functions are configured by manipulating the
receiver DIP Switch SW01 mode settings. Please refer to the manual for the receiver being
used or specific project documentation for details on relay operation.
Figure 3. Warrior HH2S-9XL10 Transmitter Warnings and Precautions
Figure 3 is the label that is permanently attached to the battery compartment cover. This label
describes warnings and precautions that are to be followed when using the transmitter
Bridge Reverse
Trolley Reverse Trolley Forward
Hoist Up Hoist Down
A/B/AUX 1
or 2
nd
Hoist Up
AUX or
2
nd
Hoist Down
Stop Horn/Start
Indicator LEDs (Red when active )
TX/RX Transmit/Receive A Selection
BATT Battery Status B Selection
Bridge Forward