Cervélo R5 Disc, Инструкция по сборке

Страница: 8 / 13

13 14
BRAKE HOSE ROUTING
These routing illustrations are intended as a supplement to
the manufacturer’s installation instructions only. For both
hydraulic and mechanical disc brakes, please refer to the
component manufacturer’s service center or website for
further information.
Chainstay
height: 25mm
Route rear
brake hose
around drive
side of fork
inside head
tube.
Route hydraulic brake hose through the frame and fork with
the Disc Hose Guide (CBG-DBH). Install and adjust calipers as
per manufacturer’s instructions.
Brake hose pass-
through in fork
steerer does not
require use of a
Disc Hose Guide.
Brake
Route rear
brake hose from
chainstay through
the down tube and
up through the
head tube.
Route brake hose
through Split
Ring, Bearing Top
Cap and out ST31
LT stem.
Compression
Ring (SR-312)
It is recommended to include
20mm-25mm of additional brake
hose length to the amount required
for the final customer fit. Doing
so will permit sufficient length for
disassembly and service purposes.
1. Measure customer fit
2. Add additional 20-25mm of
spacers
3. Cut and install brake hoses
4. Remove extra spacers
5. Complete assembly